ENM 10


ENM-10 - Level regulator switch

The simplest possible method for level control!
A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device.

No wear, no maintenance! In sewage pumping stations, for ground water and drainage pumping - in fact, for most level control applications - the ENM-10 is the ideal solution.

The regulator casing is made of polypropylene and the cable is sheathed with a special PVC compound. The plastic components are welded and screwed together. Adhesive is never used. Impurities and deposits will not adhere to the smooth casing.

The level regulator is available in different versions, depending upon the medium in which it is to be used. As standard, the regulator can be obtained with 6, 13, 20, 30 or 50 metres(20, 42, 65, 100 or 167 ft) of cable for liquids with specific density between 0,95 and 1,10 g/cm³; for other specific densities, the regulator is only available with 20 metres (65 ft) of the cable. The regulator can withstand up to 60º C (140º F).

Technical specification  (2 MB)